Hi everyone,
I have a problem when edit featureline. When using "Quick elevation edit" tool, it show correct elevation (41.57, see image 1a and 1b). But when I use "Set grade" tool, it show wrong elevation (12.67, see image 2).
It is the same featureline at the same location,
Can someone help me on this ?
Many thanks,
Solved! Go to Solution.
Solved by AllenJessup. Go to Solution.
It looks like a Units problem. 12.67 meters = 41.57 feet. Check the Drawing Settings from the Toolspace. AECDWGSETUP from the command line to confirm.
Allen Jessup
CAD Manager - Designer
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Thank you @AllenJessup
You're welcome.
A quick method I've learned to spot the foot/meter relationship. Divide the meters by 3 and multiply the results by 10.
In my head I say 1/3 of 12.6 is 4.2. Shift the decimal point and 42 is close to 41.57. That makes it likely enough to do the math to confirm it.
Allen Jessup
CAD Manager - Designer
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Can't find what you're looking for? Ask the community or share your knowledge.