Parcel Map Check Report: Setting a point of beginning

[tlincolnAY44Q]

Having some trouble setting a point of beginning for a parcel map check report. The input fields for x and y will not let me manually input coordinates and Civil 3D help says there is an icon that I need to push but I have been unable to find what they are talking about, I appreciate any help.  

[rl_jackson · Accepted solution]

Have you tried setting the POB in the Parcel itself? If it's set there I do believe that report will start from the same position as the Parcel.

[nostupidquestions]

i've got the same problem and i am in the parcel properties. i'm unable to specify the point of beginning either going through the survey map check or the parcel map check.

[rl_jackson]

Does the parcel close?

[Jeff_M]

You are editing the POB here?

[nostupidquestions]

that is where i would set it but it won't let me set it nor does it give the map check analysis. it's been happening on several of my parcel drawings.

[Dave5Y5NB]

How do you get to this dialog box?

[Dave5Y5NB]

Nevermind, I found it.

[eamezcuaB2ZTM]

The issue I'm having is that I set it per Jeff's 01-08-2019 11:28 AM screenshot, I hit "APPLY" and hit "OK," but then the coordinates for the Point of Beginning that I JUST SET inexplicably change. This is totally unacceptable. 

This happens before I even run a report too - I will return to the properties panel and the coordinates have changed on their own.

I am only doing very basic drafting (or no drafting at all) in the drawing between the time I manually set the POB and the time I notice it has changed. Nobody else is in any other XREF or anything.