One Label two surface elevations from slightly different spots

[SBoninJB57Y]

Hi All,

I am sure this has been asked a million times but is it possible to create a surface elevation label that shows the elevation of two spots on the same surface that are slightly separated? I created a design surface with top and bottom of curb. I set the top face of curb back 0.05' so I didn't have a crossing break line issue. I'd like to create one label for both bottom and top of curb that allows me to select the two points on the surface I want to extract elevations from. 

Thanks

[MMcCall402 · Accepted solution]

If the two elevations are a consistent elevation difference between the two you could do it with an expression that adds, or subtracts, a certain amount from the single surface location to derive the second.  Use it in a surface label along with a regular surface elevation.

[SBoninJB57Y]

That's a great idea. They are not a consistent elevation difference from one another in this case though. 

[MichaelH13]

Not that I'm aware of. Surely it is just as easy to have two labels and rotate/flip one out of the way?