******** How can i Edit the codes of a subassembly ****

[s.sajjad.jafari]

Hello everybody;

How can i edit the name of the point codes of a subassembly or adding a point as a code to it?

[ecfernandez]

Hi @s.sajjad.jafari, in the case of points, open the tool palettes and go to the generic tab. Look for the MarkPoint Subassembly and assign it to your assembly. It allows you to set the code of your preference

In the case of links. In the same palette, you have the LinkWidthAndSlope Subassembly which allows you to set a point and link code. If you want a lane, look for the generic pavement structure

This generic pavement allows you to control point, link, and shape codes.

I hope this helps. Best regards!

[andrewpuller3811 · Accepted solution]

If you are looking to add codes as a one off change in a drawing, in the Corridor Section Editor, you can edit user define codes.

Select the corridor

Open the section editor

On the Corridor Edit Tools panel of the Section Editor tab of the ribbon, click the drop down.

Select the Edit User Defined Codes

This allows you to add/delete user defined codes for corridor assembly sections.

You can then apply the edit to a station range from the Corridor Edit Tools panel of the Section Editor tab of the ribbon.

If you set up a code set style with a label that shows codes, you will be able to see the new codes as you set them.