Community

Earthwork Plan Production won't Undo

Earthwork Plan Production won't Undo

tcorey
Mentor Mentor
1,807 Views
6 Replies
Message 1 of 7

Earthwork Plan Production won't Undo

tcorey
Mentor
Mentor
‎06-08-2016 02:56 PM

In AutoCAD Civil 3D 2017:

 

If I use the Earthwork Plan Production tool (Analyze tab) and then Undo, the linework and text don't go away. I can Undo Back and the objects remain.

 

If I run other commands before and/or after Earthwork Plan Production, they undo correctly.

 

 

 

 

 



Tim Corey
MicroCAD Training and Consulting, Inc.
Redding, CA
Autodesk Platinum Reseller

New knowledge is the most valuable commodity on earth. -- Kurt Vonnegut
0 Likes
Like
Report
Accepted solutions (1)
Solution 1
1,808 Views
6 Replies
Replies (6)
Message 2 of 7

neilyj666
Mentor
Mentor
‎06-09-2016 12:11 AM

Tim

 

Not an answer to your query but have you ever checked outputs from the Earthworks Plan Production tool against other volumetric methods?

 

I used it when it was part of 2016 Pro Pack 1 and found the volumes generated were totally incorrect and I have never had the confidence in the tool to use it again.

 

PS Just tried in 2017 and 2016 and the text values persist after using the Delete button in the Tool. Several Right Clicks/Select Similar for the text eventually removed all the text.

neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature


AEC Collection 2026 UKIE (mainly Civil 3D UKIE and IW)
Win 11 Pro x64, 1Tb Primary SSD, 1Tb Secondary SSD
64Gb RAM Intel(R) Xeon(R) W-11855M CPU @ 3.2GHz
NVIDIA RTX A5000 16Gb, Dual 27" Monitor, Dell Inspiron 7760
0 Likes
Like
Report
Message 3 of 7

tcorey
Mentor
Mentor
in reply to neilyj666
‎06-09-2016 07:01 AM

Thanks, Neil. No, I haven't checked the volumes generated from this tool. I actually just realized yesterday this was available. I ran it to see what it does and then tried to Undo it. That's when I discovered the weirdness.



Tim Corey
MicroCAD Training and Consulting, Inc.
Redding, CA
Autodesk Platinum Reseller

New knowledge is the most valuable commodity on earth. -- Kurt Vonnegut
0 Likes
Like
Report
Message 4 of 7

neilyj666
Mentor
Mentor
in reply to tcorey
‎06-09-2016 11:21 AM
OK thanks - I'd certainly urge caution when using the output for anything...!!!

neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature


AEC Collection 2026 UKIE (mainly Civil 3D UKIE and IW)
Win 11 Pro x64, 1Tb Primary SSD, 1Tb Secondary SSD
64Gb RAM Intel(R) Xeon(R) W-11855M CPU @ 3.2GHz
NVIDIA RTX A5000 16Gb, Dual 27" Monitor, Dell Inspiron 7760
0 Likes
Like
Report
Message 5 of 7

tcorey
Mentor
Mentor
‎06-14-2016 12:37 PM
Accepted solution

Autodesk has replied directly to me and confirmed that this is a defect in 2017. It will be put on the list...



Tim Corey
MicroCAD Training and Consulting, Inc.
Redding, CA
Autodesk Platinum Reseller

New knowledge is the most valuable commodity on earth. -- Kurt Vonnegut
0 Likes
Like
Report
Message 6 of 7

DP-Admin
Explorer
Explorer
‎01-29-2021 06:49 PM

It is still a problem in Civil 3d 2021.  I just had the same thing happen, cannot undo, cannot delete entities. Do not use this tool !

0 Likes
Like
Report
Message 7 of 7

Francisco.GuzmanNQVCL
Explorer
Explorer
‎07-16-2025 09:07 AM

This is still happening in Civil 2025. After deleting data and run again the tool I can't get grid in this file. I need to save a copy before run this tool and if I want to change some option go back to this file 

0 Likes
Like
Report
Report a website issue