Default Sump Depth of 2'

[civilman1957]

Okay, this is ridiculous. I'm running C3D 2017, and it's decided all my sumps - regardless of utility - should be 2'. Doesn't matter if I run "apply rules", it's still 2'. As one post suggested, I changed all the rule sets to a sump depth of 0', and that works, but if I change one (storm) back to 1', then it corrupts the other rules to where every part's sump changes to 1' when I run any rule.

Anyone have some enlightenment?

Thanks,

Tom

[wpagl452]

Hi @civilman1957, thanks for your post!

Please try following the procedure outlined in this article (for 2017): 

https://knowledge.autodesk.com/support/civil-3d/troubleshooting/caas/sfdcarticles/sfdcarticles/Defau...

Let us know how that goes.

[civilman1957]

Winston, first of all, thanks for your replay... I saw that solution posted by you earlier for another post...I, however, am running 2017. Is there a similar solution for that?

[wpagl452]

Hi @civilman1957. This procedure should still apply for 2017.

Alter the year from 2016 to 2017 in the procedure. For example, C3DPipeNetworkRules.dll for 2017 can be found here: C:\ProgramData\Autodesk\C3D 2017\enu

[civilman1957]

Outstanding! I'll give it a try first chance I get...thanks so much...