Conditional Horizontal Target

[654work]

Attempting to use the conditional horizontal target.  Roadway is and overlay that will use the existing curb and gutter and have a new sidewalk that is 2ft from the back of curb.  There are multiple commercial and private entrances along the roadway, which will have a new depress curb and gutter.  In the past I have created an assembly for the overlay to the edge of pavement, then an offset assembly using the existing back of curb to attach the sidewalk.  A second assembly would be created for use at the entrances (depressed curb & gutter and driveway pavement).  Is there a way to use the horizontal condition target with an offset assemble?

Civil 3D 2022.2.3 Update

[AllenJessup]

I don't know the answer to your question. But Jeff Bartels has an interesting take on driveway targeting. I'm going to try it in my current project.

https://www.youtube.com/watch?v=Op3N6X7-rC8

[fcernst]

He more recently uses the newer subassembly  corridor transition capabilities for driveways now..

[Jeew-m]

Please Look HERE.