alignment problem

[fikri03262003]

I want to create an alignment in my Civil 3D, but the size of the alignment that appears is too large. I have tried to change its size in the alignment style but there is no change. The Civil 3D I am using is Civil 3D 2021. Please help me.

[Pointdump]

Hi Fikri,
Welcome to the Autodesk Forums.

You can change your Annotation Scale to something more suitable.
Dave

[Pointdump]

Fikri,
Looking more closely at your drawing, the alignment is only 0.0155 meters long.
Dave

[fikri03262003]

this file import from global mapper.
Previously, I had a chance to use it and it could go a distance of 1km. But after I tried it again, it happened like this.

[nkiakas]

Hi @fikri03262003 

You have to take a closer look to your Global Mapper Export settings (for units, coordinate system and in general all settings regarding geometry).

I have export lot of line works from Global Mapper and found the export process + settings very helpful

Regards

[fikri03262003]

I don't really understand Global Mapper. Can you help me with a way to check that?