Spindles on Instrument-Angle Valves

[jgarzaM6SUZ]

I have read a few post about adding spindles to instrument-angle valves. I am still not clear as to make this happen. From my reading the manual valves react differently from instrument valves when it comes to topworks. I am struggle with adding any type of topworks on the isometrics. I have followed a few forums but have been unsuccessful. All I get is the valve symbol. Can someone tell if this is even possible with instrument valves?

1. Our relief valves must be instruments (Type:Instrument-Angle and skey:RAFL OR A NEW ONE RZFL)
2. Added the following line ( <SkeyMap SKEY="RAFL" AcadBlock="ValveAngle"/> or <SkeyMap SKEY="RZFL" AcadBlock="ValveAngle"/>) 
3. Added to spimdle section ( <ValveToSpindleSkeyMap ValveSKEY="RAFL" SpindleSKEY="02SP"/> or  <ValveToSpindleSkeyMap ValveSKEY="RZFL" SpindleSKEY="02SP"/>)

Thanks

[h_eger · Accepted solution]

Dear @jgarzaM6SUZ ,

to make it easy, instruments do not have a spindle.
There is also no ISO class "INSTRUMENT-ANGLE"
Spindles only work with VALVE