Community
Good day. Just want to share error / problem encountered using Plant 3d 2018.1.1
Isometric:
When Isometric title block template is edited, Iso production prompts error (something like invalid memory...... message will be seen on log file) and cannot proceed on extraction.
Orthographic:
Random extracted ortho drawings becomes dumb and function such as Edit/Update/Adjacent view will not be usable anymore
Work around:
For Isometric, no work around can be formulated because iso.dwt files becomes somewhat "corrupted" after editing.
For Orthographic, work around is to create and save ortho cube of every views created to easily create and load the saved ortho cube for every ortho drawings that becomes dumb.
Solution:
After series of testing, updating Plant 3D 2018.1.1 to Plant 3D 2018.1.2 will solve the problem.
Hope this help other users who also encounter same issues, many thanks.
Best Regards,
Pat Andres
Autodesk Expert Elite
Plant 3D Administrator
GHD Manila
Good day. Just want to share error / problem encountered using Plant 3d 2018.1.1
Isometric:
When Isometric title block template is edited, Iso production prompts error (something like invalid memory...... message will be seen on log file) and cannot proceed on extraction.
Orthographic:
Random extracted ortho drawings becomes dumb and function such as Edit/Update/Adjacent view will not be usable anymore
Work around:
For Isometric, no work around can be formulated because iso.dwt files becomes somewhat "corrupted" after editing.
For Orthographic, work around is to create and save ortho cube of every views created to easily create and load the saved ortho cube for every ortho drawings that becomes dumb.
Solution:
After series of testing, updating Plant 3D 2018.1.1 to Plant 3D 2018.1.2 will solve the problem.
Hope this help other users who also encounter same issues, many thanks.
Best Regards,
Pat Andres
Autodesk Expert Elite
Plant 3D Administrator
GHD Manila
Dear @patpat79,
these problems were known in Plant 2018 1.1, especially in migrated projects.
Since Plant 2018.1.2 Update, I have not noticed any errors.
In Plant 3D 2019.1 Update these errors are also fixed.
-
If my reply was helpful, please give a "Kudo" or click the "Accept as Solution" button below (or both).
If my reply was helpful, please give a "Kudo" or click the "Accept as Solution" button below (or both).
Hartmut Eger
Senior Engineer
Anlagenplanung + Elektotechnik
XING | LinkedIn
Dear @patpat79,
these problems were known in Plant 2018 1.1, especially in migrated projects.
Since Plant 2018.1.2 Update, I have not noticed any errors.
In Plant 3D 2019.1 Update these errors are also fixed.
-
If my reply was helpful, please give a "Kudo" or click the "Accept as Solution" button below (or both).
If my reply was helpful, please give a "Kudo" or click the "Accept as Solution" button below (or both).
Hartmut Eger
Senior Engineer
Anlagenplanung + Elektotechnik
XING | LinkedIn
Forums Links
Can't find what you're looking for? Ask the community or share your knowledge.
Post to forums
