Version change log from 2008 to 2017 and most inbetween...!!!

[neilyj666]

I'm updating the company template to comply with the UK BIM Standards and we have users on various versions of LT as shown below

LT2008 – 2

LT2009 – 1

LT2010 – 2

LT2012 – 2

LT2014 – 1

LT2016 – 14

LT2017 – 2

I'm creating the template in 2016 and am using dynamic blocks, fields etc etc but realise that not all features in later versions are supported in earlier ones so does anyone know if there is a published changelog showing when the various features were added to LT?

Thanks

[Justin_Doughty · Accepted solution]

Hi neilyj,

The only thing I have is the attached, its for Full AutoCAD though. might help.

[neilyj666]

Thanks for this @Justin_Doughty - it  certainly gives me a good start...:)

[Emmsleys]

@neilyj666, See the BOX attachment and let me know if that helps.

[neilyj666]

@Emmsleys - I can't see an attachment....

[Emmsleys · Accepted solution]

It should be in the BOX invite I sent you, that you accepted. 

I'll add it here as well in case @Justin_Doughty needs it too. 

[Emmsleys]

Post back and let me know if you are unable to access the BOX or download the spreadsheet. 

Also, it is a collection of all the commands/sysvariable on both AutoCAD and AutoCAD LT. You will need to look to column C. 

Let me know if this helps or if you have questions. 

[neilyj666]

Ah yes I see it now...:)

[Emmsleys]

Hopefully it helps