Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Why doesn't Object Snap work when drawing Double Lines....???
Setting Snap (within Dline) to a maximum of 10 pixels doesn't seem to
anything and/or then when hitting F3 to activate Snap brings up the settings
dialogue (with all choices blank). Then it doesn't draw a double line.
I don't get it or am I missing something important...???
DLINE command turns off Osnaps because the routine does not work well with
them on: a limitation since this is basically the un-modified version of the
original LISP that showed up with release 9 of full AutoCAD over 13 years
ago.
To use Osnaps with DLINE, you have to manually type in each Osnap you need,
when you need it.
"Dean Saadallah" wrote in message
news:DD7ED0D2C3D7E4AE4A1D4CC20EFA86BA@in.WebX.maYIadrTaRb...
> DLINE command turns off Osnaps because the routine does not work well with
> them on: a limitation since this is basically the un-modified version of
the
> original LISP that showed up with release 9 of full AutoCAD over 13 years
> ago.
>
> To use Osnaps with DLINE, you have to manually type in each Osnap you
need,
> when you need it.
>
> --
> Dean Saadallah
> http://www.pendean.com
> LT Express Utilities
> http://www.pendean.com/ltexpress
> Expanded Links Pages
> http://www.pendean.com/lt/links.htm
> --
>
>
Shift + right click and select snap. Relatively easy to use.
Simon
"Ric Norris" wrote in message
news:6D3C585BDE04E19BC8FDDF0B8641EEE1@in.WebX.maYIadrTaRb...
> How does one do that....???
>
> Really makes DLINE quite useless really....!!!!
>
> Ric Norris.
> http://users.bigpond.net.au/cavedrawings
>
> "Dean Saadallah" wrote in message
> news:DD7ED0D2C3D7E4AE4A1D4CC20EFA86BA@in.WebX.maYIadrTaRb...
> > DLINE command turns off Osnaps because the routine does not work well
with
> > them on: a limitation since this is basically the un-modified version of
> the
> > original LISP that showed up with release 9 of full AutoCAD over 13
years
> > ago.
> >
> > To use Osnaps with DLINE, you have to manually type in each Osnap you
> need,
> > when you need it.
> >
> > --
> > Dean Saadallah
> > http://www.pendean.com
> > LT Express Utilities
> > http://www.pendean.com/ltexpress
> > Expanded Links Pages
> > http://www.pendean.com/lt/links.htm
> > --
> >
> >
>
>
"Simon Irvine" wrote in message
news:3E1E1C7ABE5ABCB3E35B182B8AEF4258@in.WebX.maYIadrTaRb...
> Shift + right click and select snap. Relatively easy to use.
> Simon
>
> "Ric Norris" wrote in message
> news:6D3C585BDE04E19BC8FDDF0B8641EEE1@in.WebX.maYIadrTaRb...
> > How does one do that....???
> >
> > Really makes DLINE quite useless really....!!!!
> >
> > Ric Norris.
> > http://users.bigpond.net.au/cavedrawings
> >
> > "Dean Saadallah" wrote in message
> > news:DD7ED0D2C3D7E4AE4A1D4CC20EFA86BA@in.WebX.maYIadrTaRb...
> > > DLINE command turns off Osnaps because the routine does not work well
> with
> > > them on: a limitation since this is basically the un-modified version
of
> > the
> > > original LISP that showed up with release 9 of full AutoCAD over 13
> years
> > > ago.
> > >
> > > To use Osnaps with DLINE, you have to manually type in each Osnap you
> > need,
> > > when you need it.
> > >
> > > --
> > > Dean Saadallah
> > > http://www.pendean.com
> > > LT Express Utilities
> > > http://www.pendean.com/ltexpress
> > > Expanded Links Pages
> > > http://www.pendean.com/lt/links.htm
> > > --
> > >
> > >
> >
> >
>
>
I was having the same problem and figured I was doing something wrong. But I see here that Osnaps really *are* turned off with the Dline command. I mean really - can it be that hard to fix???
DLINE requires running osnaps to be turned off or it will fail to draw the parallel lines properly: DLINE is not an object type in AutoCAD, it's just two separate LINE objects drawn in parallel that used to be an old LISP back in the day.
LT does not have MLINE object types, which is the real solution.
