Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
After installing Navisworks freedom 2016 with AutoCad 2007LT already installed I can no longer run AutoCAD 2007LT basically stops responding and closes. My questions is are there known issues with the two products coexisting on the same system,.
Those two applications are 10-years apart and probably not tested to be side by side: have you restarted your PC? then tried a repair reinstall of LT2007? Is there an error message when LT2007 is started? What is your Windows OS?
First try to remove the new program, restarting Windows, and see if the issues go away. Unless you want to wait for an LT2007 user to drift in here and find this post, a repair reinstall of LT2007 (not a removal/reinstall) would be the next thing to try. Good luck.
