Hi,
>> Why OVERKILL does not work on Ellipses?
As long as your ellipses are not converted to polylines it's as designed!
From the help >>>here<<<:
Removes duplicate or overlapping lines, arcs, and polylines.
- alfred -
Why OVERKILL does not work on Ellipses?
It does work on Ellipse objects.
Hi,
>> It does work on Ellipse objects
try the attached dwg-file ...
- alfred -
Why does it work in one of my local files? If you have time can you please do a test on this file? I was able to overkill my ellipse.
Hi,
>> Why does it work in one of my local files?
Rotate or mirror your second ellipse ... then try _OVERKILL again.
- alfred -
Hi,
OVERKILL are working on Ellipses https://autode.sk/2GEAMEs
1. Check center Z value is "0"
2. Enter new value for PEDITACCEPT <0>
Thanks
Jayhar.M.J
Hi,
Please try the same with my file ...
(again attached in 2013 format)
- alfred -
These two ellipses are different axis, so how command work ???
Overkill not working in this file.
Thanks
Jayhar.M.J
Hi,
>> These two ellipses are different axis, so how command work ???
Overkill should find overlapping geometry, independent of a line that goes from right to left or left to right ... and so an axis of an ellipse going from right to left or left to right.
And I guess that's why Autodesk did not mention the ellipse object in the help of command _OVERKILL.
- alfred -
Enter new value for PEDITACCEPT <0>
What does PEDITACCEPT have to do with it? That just controls whether or not you get an extra prompt during the PEDIT command if you choose an entity that is not a polyline.
Can't find what you're looking for? Ask the community or share your knowledge.