Anuncios

The Autodesk Community Forums has a new look. Read more about what's changed on the Community Announcements board.

Wall Design - Rock Climbing Wall; Measured surface features.

Anonymous

Wall Design - Rock Climbing Wall; Measured surface features.

Anonymous
No aplicable
  1. I'm designing an indoor rock climbing gym with multiple overhangs. What areas (broad or specific) should I focus on to come up with a rough draft of my design. How do I manipulate multiple shapes as seen in the picture provided? What skills do I need and what areas do I need to learn?
  2. Covering the walls are holes for screws, each screw is placed every six inches up - down - left - right. Is there a way to uniformly put a representation of these screw holes on the surface of the wall with the correct spacing?

https://www.walltopia.com/media/k2/items/cache/9fc5e2a09509b5613281f31393bb0737_M.jpg

 

 

 

 

Responder
1.968 Vistas
1 Respuesta
Respuesta (1)

pendean
Community Legend
Community Legend
1. Work with a rock climbing design consultant, or a **** good rock climber interested in designing what you posted.

2. Make a BLOCK of a typical spaced set then start placing them by hand one by one i the pattern you desire.

0 Me gusta