Trim command working indifferently

[vinodkl]

Trim command not working the way it was working earlier. It works properly when a single selection is made but its trimming little extra when crossing is used. Below is the snapshot of the same which shows what I am talking about. I also tried edgemode=1 still no use. Any help will be appreciated.

[jayhar]

Hi,

set the drawing's UNITS to Decimal and set the Precision setting to 8 places after the decimal point

Please Mark the Post or Posts as Solution(s) to help others find the answer quickly. If your issue persists,

Please give me a bit more detail on this issue so we can continue to work towards getting this solved.

Thanks You
Jayhar.M.J

Helpful Links: Prepare your computer for download |  Autodesk Virtual Agent | Clean Uninstall | Steps for Setting-Up Student Software

[vinodkl]

I tried that but it still the same.

[jayhar]

Which AutoCAD version you using??

Check UCS,
Set UCS in world

[vinodkl]

I am using AutoCAD 2015. I already tried the changing the UCS to world. Its didn't resolve the issue.

[jayhar]

Enter command EXPORTTOAUTOCAD> Bind > Yes > Filename > enter

it will save new cad file then try to trim

[vinodkl]

That also didn't fix the problem.

[jayhar]

just another fix, if you type "EDGEMODE" at the command line,
and set it to 0 (zero) that'll work too

[jayhar]

Copy past to original coordinates in new cad file