TORIENT COMMAND NOT WORKING

TORIENT COMMAND NOT WORKING

Anonymous
Not applicable
2,362 Views
3 Replies
Message 1 of 4

TORIENT COMMAND NOT WORKING

Anonymous
Not applicable

AutoCAD 2019 is giving me this message whenever I try to use the TORIENT command:

 

Command: TORIENT
(*pop-error-mode*) underflow.
Cannot invoke (command) from *error* without prior call to (*push-error-using-command*).
Converting (command) calls to (command-s) is recommended.

 

What should I do?

 

0 Likes
Accepted solutions (1)
2,363 Views
3 Replies
Replies (3)
Message 2 of 4

MMcCall402
Mentor
Mentor
Accepted solution

Yea, this happens sometimes. Save the drawing, exit AutoCAD and reopen.  Something goes wonky and you need to close up shop and reopen fresh.

Mark Mccall 
CAD Mangler


EESignature


VHB - Engineering, Inc.

Message 3 of 4

Anonymous
Not applicable

Thank you! That worked!

0 Likes
Message 4 of 4

jayhar
Advisor
Advisor

Hi,

your same post here https://forums.autodesk.com/t5/autocad-forum/torient-command-not-working/m-p/8559071#M966023

 

you need to check any error in autocad, this time its solve again and again it repeat because your error already shown

(*pop-error-mode*) underflow.
Cannot invoke (command) from *error* without prior call to (*push-error-using-command*).
Converting (command) calls to (command-s) is recommended.

 

Also you didn't give replay in this post

first confirm no error in AutoCAD.

 

 

Thanks & Regards,

 

JAYHAR.M.J

Detailing Engineer

CICON Rebar Solutions Pvt. Ltd.

DD Trade Tower, Kaloor-Kadavanthara Road,

Kaloor, Ernakulam, Kerala,India - 682017

E-mail : jayharcicon@gmail.com Mob : +91-9961032444

 

AutoCAD Certified Professional 

Issued by Autodesk                   

 

 

Please Subscribe YouTube Channel
https://www.youtube.com/channel/UCclj8v9vHQiFa8_DriuAk3w

Please Mark the Post or Posts as Solution(s) to help others find the answer quickly.
0 Likes