I need exploded text. I use explode command on mtext object.
Message is 1 was not able to be exploded.
Thank you for support.
TuncayBAKKAL
AutoCAD Eğitmeni ve Danışmanı
AutoCAD ve Fusion 360 Görsel Eğitim
Fusion 360 Kitabı Çıktı!
http://www.tuncaybakkal.com
Instagram: @tuncay_bakkal
Forumlarımızda çözülen sorularınızı "ÇÖZÜM OLARAK KABUL ET" ("Accept as Solution") seçimiyle işaretlemeyi lütfen unutmayın.
Beğendiğiniz mesajları lütfen "Övgü Puanı" ("Kudos") ile ödüllendirin.
Solved! Go to Solution.
Solved by tmccar. Go to Solution.
Hi TuncayBAKKAL,
Welcome to the AutoCAD answer day!
I understand that you can't explode Mtext elements to text, right?
Can you post a sample file to check what can be wrong? by default the explode command should convert all mtext lines in text.
Thanks for sharing.
Explode command not working on mtext and text for AutoCAD 2016.
txtexp command working.
file is attached.
TuncayBAKKAL
AutoCAD Eğitmeni ve Danışmanı
AutoCAD ve Fusion 360 Görsel Eğitim
Fusion 360 Kitabı Çıktı!
http://www.tuncaybakkal.com
Instagram: @tuncay_bakkal
Forumlarımızda çözülen sorularınızı "ÇÖZÜM OLARAK KABUL ET" ("Accept as Solution") seçimiyle işaretlemeyi lütfen unutmayın.
Beğendiğiniz mesajları lütfen "Övgü Puanı" ("Kudos") ile ödüllendirin.
Hi,
The Explode command converts MTEXT to TEXT, it was not defined to convert text to a group of lines/arcs that defines the character boundary, for this you need to use the TXTEXP as mentioned.
____________________________________________________________________________________________________________
If my post answers your question, please click the "Accept as Solution" button. This helps everyone find answers more quickly!
Thank you for support.
TuncayBAKKAL
AutoCAD Eğitmeni ve Danışmanı
AutoCAD ve Fusion 360 Görsel Eğitim
Fusion 360 Kitabı Çıktı!
http://www.tuncaybakkal.com
Instagram: @tuncay_bakkal
Forumlarımızda çözülen sorularınızı "ÇÖZÜM OLARAK KABUL ET" ("Accept as Solution") seçimiyle işaretlemeyi lütfen unutmayın.
Beğendiğiniz mesajları lütfen "Övgü Puanı" ("Kudos") ile ödüllendirin.
It doesn't look like this command comes with AutoCad 2015 LT for MAC
I was familar with txtexp on my previous system and now the command doesn't exist?
Is there a work around to convert mtext to lines and arcs?
I definitly don't have it.
Below is a screen shot of available commands for the version of AUTOCAD i'm running.
I definitly don't have the txtexp either..which is what i was used to.
Mac doesn't have Express Tools
So TXTEXP doesn't work, time to use Windows platform if you really need more commands.
Lt Both Mac and Windows don't have ET
I doubt that he said he uses that command (TXEXP) before is true.
But WMFOUT to explode text can be used with LT for Windows.
If you want the Roman Simplex font, one alternative is to generate the text online with this tool:
http://wildsparx.com/textlines
This gives you a dxf which you can INSERT.
I found something... (I neither have the Express tools)
I plotted a MTEXT as .PDF, then that .PDF convert to .DWG
Capooomm!!!
#explodetext
Can't find what you're looking for? Ask the community or share your knowledge.