Selecting components, tables and texts issues

[daniel_hernandezEGPKS]

Hi community,

Somebody had have this issue with AutoCAD? (See image attached)

When I´m working and I try to select, tables, components, text and everithing looks like a dotted lines. I would like to know how I can to fix it. 

[user181]

Maybe it is the variables SELECTIONEFFECT and PRESELECTIONEFFECT.  Type them at command line and make sure they are set to 1

[daniel_hernandezEGPKS]

Thanks for sharing, but I already check those commands and the issue was not solved. In fact when I try to trim as well just appears one dotted line, and before this worked as a rectangle form to trim.

Please see attached images.

[pendean · Accepted solution]

@daniel_hernandezEGPKS For dotted line issue, set your GFXDX12 to zero, restart AutoCAD, then try again.

For TRIM command not giving you window selection: are you just fighting the TRIMEXTENDMODE variable setting by chance?

Are you using a 3rd party add-on?

Accidentally trigger FENCE selection method?

Not sure how one is related to the other, why the change of question?

[paullimapa]

Did you recently started experiencing this problem with an updated AutoCAD version?

Enter About command, do a screenshot and share that here.

It looks like your graphics driver is not compatible with AutoCAD.

Enter command GraphicsConfig, do a screenshot and share that here also.

[daniel_hernandezEGPKS]

Hi Paul,

I appreciate much your support. Here the screnshots.

[paullimapa · Accepted solution]

Looks like you do have the latest updates of 2024LT installed.

But something is not right with your graphics.

Try at command prompt enter the following:

GFXDX12

0

(that is a zero) and then restart LT.

Now enter command GraphicsConfig and see if you have the option under 2d Display Settings to change to different modes like Advanced, Intermediate & Basic.

[daniel_hernandezEGPKS]

Thanks a lot for sharing everyone!

The issue was solved with this porocess.

[paullimapa]

glad to have helped...cheers!!!