Scale problem with BricsCAD X AutoCAD

[alfinmuharrram97]

Hey everyone. I have a little problem here and really need your help. I have a couple drawing in BricsCAD with original scale (1:1). On the other hand, I have a same drawing in AutoCAD with original scale (1:1). The problem is, I try to copy the AutoCAD drawing to the BricsCAD but, the scale is not 1:1. However, the scale become small in BricsCAD. Hope you guys can guide me with this problem. Thanks in advance. in BricsCADin AutoCAD

[cadffm]

Hi,

1. Make sure it is the same size.

   Use command DIST to measure a length in both

   Do you think they are drawn in same units?

2. Does it works the opposite way, from BCAD to ACAD?

    If so, check your BCAD InsunitsScaling setting

[alfinmuharrram97]

Thank you for your reply. I've already check it and I'm 100% sure it has the same size with both drawing. If I use this "InsunitsScaling" command, what should i do next?

[cadffm]

---

@alfinmuharrram97  schrieb:
what should i do next?

---

So the opposite way works, from BCAD to ACAD?

Okay,

if you are not familiar with a feature/command/sysvar, learn more about it, press [F1]

But this help is a bit confused, so remember the current value (1 ?) and try to use value 0 (means off)

[cadffm]

You are talking about clipboard action (ctrl+c/ctrl+v), or?

If not, tell us your way " try to copy "

and draw in line with length = 1 in Acad

how long is it after pasting in Bcad?

[pendean · Accepted solution]

[paullimapa]

What if you xref the Briscad dwg into Autocad? Does the scale look right then?

[Valentin_CAD · Accepted solution]

@alfinmuharrram97 ,

---

@alfinmuharrram97 wrote:

... The problem is, I try to copy the AutoCAD drawing to the BricsCAD but, the scale is not 1:1. 

---

Might want to consider these links:

• Copy /paste wrong scale — BricsCAD Forum (bricsys.com)

• How to Change Units In BricsCAD - Bricsys Blog

• BricsCAD Forum (bricsys.com)

[alfinmuharrram97]

This method looks good. I tried it and it works. thanks...