Anuncios

The Autodesk Community Forums has a new look. Read more about what's changed on the Community Announcements board.

Scale problem with BricsCAD X AutoCAD

alfinmuharrram97
Explorer

Scale problem with BricsCAD X AutoCAD

alfinmuharrram97
Explorer
Explorer

Hey everyone. I have a little problem here and really need your help. I have a couple drawing in BricsCAD with original scale (1:1). On the other hand, I have a same drawing in AutoCAD with original scale (1:1). The problem is, I try to copy the AutoCAD drawing to the BricsCAD but, the scale is not 1:1. However, the scale become small in BricsCAD. Hope you guys can guide me with this problem. Thanks in advance. in BricsCADin BricsCADin AutoCADin AutoCAD

0 Me gusta
Responder
Soluciones aceptadas (2)
807 Vistas
8 Respuestas
Respuestas (8)

cadffm
Consultant
Consultant

Hi,

 

1. Make sure it is the same size.

   Use command DIST to measure a length in both

   Do you think they are drawn in same units?

 

2. Does it works the opposite way, from BCAD to ACAD?

    If so, check your BCAD InsunitsScaling setting

 

 

   

 
 

 

 

Sebastian

alfinmuharrram97
Explorer
Explorer
Thank you for your reply. I've already check it and I'm 100% sure it has the same size with both drawing. If I use this "InsunitsScaling" command, what should i do next?
0 Me gusta

cadffm
Consultant
Consultant

@alfinmuharrram97  schrieb:
what should i do next?

So the opposite way works, from BCAD to ACAD?

Okay,

if you are not familiar with a feature/command/sysvar, learn more about it, press [F1]

But this help is a bit confused, so remember the current value (1 ?) and try to use value 0 (means off)

 

Sebastian

0 Me gusta

cadffm
Consultant
Consultant

You are talking about clipboard action (ctrl+c/ctrl+v), or?

 

If not, tell us your way " try to copy "

and draw in line with length = 1 in Acad

how long is it after pasting in Bcad?

Sebastian

0 Me gusta

pendean
Community Legend
Community Legend
Solución aceptada

pendean_0-1724165047126.png

 

0 Me gusta

paullimapa
Mentor
Mentor

What if you xref the Briscad dwg into Autocad? Does the scale look right then?


Paul Li
IT Specialist
@The Office
Apps & Publications | Video Demos
0 Me gusta

Valentin-WSP
Mentor
Mentor
Solución aceptada

@alfinmuharrram97 ,

 


@alfinmuharrram97 wrote:

... The problem is, I try to copy the AutoCAD drawing to the BricsCAD but, the scale is not 1:1. 


 

Might want to consider these links:

 

 

 



Please select the "Accept as Solution" button if my post solves your issue or answers your question.


Emilio Valentin
0 Me gusta

alfinmuharrram97
Explorer
Explorer
This method looks good. I tried it and it works. thanks...
0 Me gusta