Question drawing lines

This widget could not be displayed.

Question drawing lines

Anonymous
Not applicable
‎04-12-2019 01:06 AM

Hello,

I was wondering if it is possible when drawing a straight line in AutoCAD that if the lines crosses other lines. It makes an arch over the other line. Like in this screenshot.Autocad Drawing Lines.png

I need to do it now by hand. Draw a line to a certain distance from the line then add a 180 degree arch and draw the line further straight.

0 Likes
Reply
Accepted solutions (1)
Solution 1
349 Views
2 Replies
Replies (2)

ennujozlagam
Mentor
Mentor
‎04-12-2019 02:08 AM

hello, i don't think it's possible you still need to draw arc line or draw a pline > first point to second point > arch > s > pick point > point > L . thanks





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
0 Likes

ennujozlagam
Mentor
Mentor
‎04-12-2019 02:21 AM
Accepted solution

hello, please see screencast below. thanks

 

 





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
0 Likes
Report a website issue