problem with some layers

[yossi480]

i have some issue with some layers. in some of them i can only see dots where the grips are instead of full lines. 

the problem isn't with the drawing. everythung is ok when i open it on another pc. i think its a settings matter.

thanks for the repliers.

screenshot added.

[TheCADnoob]

Is it a standard line type? If not, can you change it to a standard line type temporarily and see if it behaves as you would expect.

[Valentin-WSP]

@yossi480 ,

Welcome to the AutoCAD forum!

Compare your support path from the other computer.

These links may provide more help:

• Custom linetypes are not displayed in AutoCAD drawings
• Linetypes display as dots or are missing in AutoCAD
• Linetypes do not work or display as expected in AutoCAD

[paullimapa · Accepted solution]

could be your computers graphics driver not being 100% compatible

try this setting first: GFXDX12 = 0

https://www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/How-to-make-AutoCA...

If that doesn't work enter command GRAPHICSCONFIG and under 2D Display Settings select Intermediate:

If that still makes no difference disable Hardware Acceleration

[yossi480]

the gfxdx12=0 did it! thanks.

[paullimapa]

glad to have helped...cheers!!!