Problem with move, strecht, extrude command

[Anonymous]

Hi everyone,

I have bought a new computer, and installed autocad 2019. I'm having big issues with all the commands involving a move. basically it looks like the items are attracted by an other point in the drawing, so I can't move them properly or strecth etc.... I have attached a video of the screen. I also installed 2021 version, and I 'm having the same issue. 

[imadHabash]

Hi,

Q: does this happened if you start a new empty CAD dwg and just MOVE and STRETCH a line ?

if it's OK ... please attache here your CAD dwg ( with the problem ) for testing ?

[Anonymous]

Hi, 

It does it with any file,  even with a new drawing. I join you a little video of what it does just after 2 minutes I'm working in the new drawing.

It doesn't do it all the time, so this lead me to believe it is a bug from windows more then autocad.

[parkr4st]

turn off all  snaps to eliminate the possibility that is causing the problem.  grid, object, etc.  the snaps are on in your settings.  

[imadHabash · Accepted solution]

would you try this please :

• try another mouse , any changes ?
• dock your command line ( not floating ) . 

[Anonymous]

Thanks for your help but it still not working. have a look at the video.

[imadHabash]

i notice from your previous attachments that your Hardware acceleration icon is turning OFF/on automatically !!!

is that real ... ? you may need to check your drivers ?

[Anonymous]

Hi,

I have changed the mouse and it is not longer causing problem. I will work a bit with it then I will accept the sollution if I see this was the issue

[imadHabash]

Great ... waiting for confirming the issue . 

All the best ... 

[Alfred.NESWADBA]

Hi,

can you please type in the command as shown here:

_.MOVE<ENTER>

...are you now asked for objects and than for basepoint?

You might have a tool which overrides the _MOVE command (or the M shortcut, if defined?).

- alfred -

[Anonymous]

I m not sure but my Nvidia graphic driver is up to date. Is it an other driver involved with the hardware accelarator? 

[Anonymous]

Hello,

I had this problem with all the command with a deplacment, move stretch
extrude.

Now I have changed the mouse and it looks like it is working again. Many
thanks for your help