Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I needed to test the 3d printer so I took our school mascot (Go Bobcats!), imported as a 2d image, and started extruding using PressPull. Once I got half way done extruding, AutoCAD froze. I tried updating, force quit and restarting, and didn't find any limitations on licenses.
Right click on View Cube set to Parallel rather than Perpsective.
Zoom All
Rotate around a bit.
Zoom All again.
Click on the Top view of the view cube.
See anything unexpected?
Get rid of it if you do.
Union
select all.
----------------------------------------------------------------------------------------- Autodesk Inventor 2019 Certified Professional Autodesk AutoCAD 2013 Certified Professional Certified SolidWorks Professional
Also, when I try PressPull (the problem description) - not expected behavior.
Until I follow the steps I suggested earlier.
Model (image you posted) is wayyyyy down there....
But without any feedback from the OP....
----------------------------------------------------------------------------------------- Autodesk Inventor 2019 Certified Professional Autodesk AutoCAD 2013 Certified Professional Certified SolidWorks Professional
