Move defaults to displacement

[Anonymous]

I have been using AutoCad for more than a few years.  I recently upgraded to AutoCad 2020.  When I use  the move, copy, rotate, or stretch command I the past I could specify the base point.  Withe 2020 These commands default to the displacement, which just executes the command to whatever point it want to.  How do I disable the displacement option.  I tried pinning the command line, setting the Dyn mode to 0, but nothing stop the commands from defaulting to displacement.

[imadHabash]

Hi,

you must have    Specify base point or [Displacement] <Displacement>:    in your command line after selecting the object , have you? i think that you have press enter twice to get the way that you have . 

[vinodkl]

Hi,

Can you check if your AutoCAD is updated?

And also after executing the command press F2 and then copy the command history and post in the reply.

[Anonymous]

I downloaded the latest update. This worked for several command, but the move command defaulted to displacement.
Command: _move
Select objects: 1 found

Select objects:

Specify base point or [Displacement] :

Specify displacement <0.0000, 0.0000, 0.0000>:

Command: *Cancel*

[ВeekeeCZ]

Try to type

.move

(with an initial dot)

and see... 

[Anonymous]

when it asks you to specify base point or displacement, you need to pick a point. If you just hit enter it will take you to the displacement option.

[Anonymous]

OK after many years of hitting enter for the base point I'll need to learn not to do that.

[Anonymous]

I can't get that far.  When I right click to enter after select object the AutoCad  just defaults to displacement and moves the object. 

[imadHabash]

>> When I right click to enter after select object the AutoCad  just defaults to displacement and moves the object. 

instead of right click and you just press keyboard enter or spacebar , any changes ? OR / and if you change your mouse with another new one , any changes ?

[Anonymous]

Using enter on the keyboard seems to work. I will try a different mouse.

[dumi_mihai_i]

It is not ok to do additional clicks!

How come it works flawless from command bar but you need to press an additional Enter/Space when using keyboard? (in command line, there are no difference in commands, excepting the auto displacement when using keys)