Lost linetype layer select tab

Anonymous · ‎01-21-2020

I recently had a computer melt down and had to reinstall my AutoCAD LT 2104 but had to reset my display to classic toolbar. Sadly I customised to try to match previous set up and have now lost my Linetype Layer name from my linetype properties bar. I still have buttons for Colour Control, Linetype control and Lineweight control but how do I reset my toolbar to show the lietype name? Any help would be much appreciated.
Barrie

zia_rehman · ‎01-21-2020

-toolbar

properties

show

____________________________________________________________________________
Please mark this post "Accept as Solution" if my reply solves the issue or answers your question.
____________________________________________________________________________

Zia

ennujozlagam · ‎01-21-2020

you can refer to this LINK and LINK and see if helps. thanks

Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.

Anonymous · ‎02-12-2020

Thank you for your response, unfortunately, it is the Layer Control block that is missing; the one that shows what layer name and whether it is on or off, freeze or thaw and lock or unlock, that is not showing after modifying the set up!

Is there just a selection missing from Layers or Layers 11 in the selector set-up?

Community

Lost linetype layer select tab

Lost linetype layer select tab

Lost linetype layer select tab