Hello,
I'm doing a project for school and here are the starting directions:
"The point of beginning (POB) of this survey is measured
from BM#8332. This benchmark is located at the northeast
corner of the intersection of SW Washington Street and
SW Oleson Road. The coordinates for the benchmark are
1421334.93,783207.62. The first point in the survey for
Oleson Village (the POB) is 113.66 feet from the benchmark
and at a bearing of N5‹2723W. Note the general location of
these points in Figure 2."
So here's my issue. I'm trying to draw a line from the benchmark of "1421334.93,783207.62", but the line won't stick to that first point. If I start a line at 1,1, it will stick. If I start a line at 1000,1000, it will stick. Even if I knock off the last digit of each number before the decimal point "142133.93,78320.62", it will stick. Why is this? My limits are set to 2000000,2000000. I'm lost. This is scary becasue I havn't even started the project yet and I've spent 2 hours trying to figure this out. Any help would be much appreciated!
Thanks in advance.
PS. I attached the project.
R,
James