Hello All
I'm using AutoCAD 2013 and no matter what I do my Line color always comes up green even
when the current layer color is red. I have to keep going back to proprieties and change line color
to red. Any advice would be helpful.
Dave
Northern California
Solved! Go to Solution.
Solved by scot-65. Go to Solution.
Solved by pendean. Go to Solution.
Solved by ian.mag. Go to Solution.
Solved by Vinayv4v. Go to Solution.
Find the attachments........
please upload your cad file...............
Hi, Enter command COLOR and make sure it is set to BY LAYER format.
Check what is the value of system variable SETBYLAYERMODE. Default value is <255>.
Cheers,
Vinay Vijayakumaran
Scot-65
A gift of extraordinary Common Sense does not require an Acronym Suffix to be added to my given name.
I have tried both COLOR and CECOLOR and neither had the color of this array to match the layer. Other arrays in other locations in the same drawing had the correct color.
None of the above solutions worked for me. Then I figured out all of the ones I had issues with were Block References. Solution there is to edit each block with the block editor and make sure all the parts of the block are layer "0", then each instance of the block will take on the ByLayer color if assigned.
Can't find what you're looking for? Ask the community or share your knowledge.