LAYER PROPERTIES - TABS ARE MISSING

[RoyWickrama_RWEI]

After a long spell of using Autodesk Inventor, currently I am doing with AutoCAD. Getting some hard times.

I wanted to create a new layer. I did it with the help of RMB options in the dialog box.

Currently, it is showing me up a filtered list. 

I would like to know how to get the layer properties tab similar to Figure-1

Please help. Thanks.

[neaton]

Have you restarted and reselected your workspace? I find glitches like that usually fix themselves with a restart or reset to defaults (my last resort).

Nancy

[rkmcswain]

Those are not "Tabs". Those seven buttons are, from the left:

"New Property Filter"

"New Group Filter"

"Layer States Manager"

"New Layer"

"New Layer VP Frozen in all Viewports"

"Delete layer"

"Set Current"

You are also not looking at a filtered layer list in the Figure 2, note that the layer filter is set to "All".   It sounds like you may be having a display issue, see this: https://forums.autodesk.com/t5/autocad-lt-forum/layer-properties-manager-menu-button-icons-missing/t...

[RoyWickrama_RWEI]

Thanks. You are right. I have no reference to know what they are: so I said tabs. I know on of them is for creating  a new layer.

Tomorrow, I am getting support from VAR on some other issue. They might fix this issue as well.

[rkmcswain]

Yes, that button corresponds to this one (AutoCAD 2021 shown)

[RoyWickrama_RWEI · Accepted solution]

Thanks for the reply.

It is available in AutoCAD 2019 as well. I had another issue; i.e. the view cube was not doing well more than for the top view and the home (which was the top view).

I updated the AutoCAD installation with AutoCAD_2019.1.2_Update_64bit.exe.

Now my both problems:

1. view-cube was not functional for more than for the top-view (Figure-2)

2. Layer properties dialog box (Figure-1) are ok.

[imadHabash]

>> 1. view-cube was not functional for more than for the top-view (Figure-2)

if you click the house icon over the view cube , any changes ?

>> 2. Layer properties dialog box (Figure-1) are ok.

Good job .

[RoyWickrama_RWEI]

When I clicked the house icon over the view cube, it restored the top-view.

Having said sa, I was only able to do with top view. None of the other views did at all.

Note: After the upgrade, all the views are from within view-cube are functional.