Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Select your line/polyline & check properties to see its linetype. If it's set to BYLAYER it's possible it is being inserted on a layer with a CONTINUOUS linetype or something similar and is adopting that style.
Otherwise, Verify MSLTSCALE and PSLTSCALE are set to 1, and make sure your CANNOSCALE in model space is set to the value you want.
REGEN & see if that does it for you. Good luck!
Joel Ritner C3D Certified Professional BIM/Systems Manager Najarian Associates, NJ
in your drawing open 'LA' layer, search for the layer name that is not printing correctly. then change the line type uner the Linetype or VP Linetype column to your desired linetype.
