Help me with drawing - Array - AutoCAD 2022

[gukuvegetasherif23]

I tried using the hexagon edge as a base of the circle but it seems wrong and i think i use polar array to complete the rest

@gukuvegetasherif23 Your post title was modified to add the product name and version and to increase findability - CGBenner

[imadHabash · Accepted solution]

Hi,

You draw the circle to reach to the edge of base hexagon; you should draw it for the middle!!

The trick in my solution is to find angle 120° which represents the interior angle of the base hexagon or draw lines perpendicular to base hexagon.

[parkr4st]

Attached .dwg

Two hexes.  POLYLINE 1 to 2 straight, arc to 3 line to 4 and arc to 1 and close.

OFFSET to corner of inner hex for the inner line and ARRAYPOLAR

[vinodkl]

https://forums.autodesk.com/t5/autocad-forum/help-me-with-my-drawing/m-p/13796187#:~:text=Please%20t...

[CGBenner]

@gukuvegetasherif23 

Hello, do you still need help with this question?

[gukuvegetasherif23]

Thx the previous replies answered my question 

If u can help me with this it will be much appreciated i tried to tk to make the cirlce but it didn't work so what should method should i use to draw it

[parkr4st · Accepted solution]

layout some xlines for guides per the dimension.  draw the outer ellipse  60 x 164 units.  offset 3 units inward x2 for two inner ellipses.  center ellips intersect 60 units offset xline for circle centers.  two circles and trim away unwanted lines and arcs, etc.  erase xlines & middle elleipse and rotate and array as asked for. 

[imadHabash · Accepted solution]

Hi @gukuvegetasherif23 
Click on below image and see how it works ....