Is there a way of isolating drawings objects, linetypes, test styles, layers names & block names to allow a streamlined alignment to a new drawing standard. This work involves weeding thru a single dwg file, made up of 100+ dwg files with over 250k entities?
I have already used layer filtering to isolate & assign new layers to most entites but there are too may falling thru the cracks.
Any thoughts are welcome.
Solved! Go to Solution.
Solved by SteveChing4507. Go to Solution.
Hi,
>> a way of isolating drawings objects, linetypes, test styles,
>> layers names & block names
You can't isolate linetypes or text styles or layer-names or block-names.
It sounds similar to what I have to avoid purging such items ... I create a block, with lines on the layers I don't want to be purged, with linetypes I don't want to be purged, creating text objects with text styles I don't want to be purged and insert the blocks inside my "nopurge" block, that should not be purged. If you have such a block you can use _WBLOCK to export all you need from the current dwg-file to create standards from that.
Is that what you are looking for?
- alfred -
Can't find what you're looking for? Ask the community or share your knowledge.