Dimensions wrong in paper space

[Anonymous]

I have set all the settings up correctly for dimensioning in paper space but when I do the dimension it is showing as 120 for example. But should be 12025mm which is what it measures at. Can anyone help me? 

[Alfred.NESWADBA]

Hi,

welcome @Anonymous!

In case the incorrect dimension value is shown for dimensions created with object-snap (to existing model-space objects) ... please upload the dwg file with your dimension object marked which shows the incorrect value so we can look into your settings.

>> I have set all the settings up correctly

If everything would be set correctly then AutoCAD would show the correct value. 😉

- alfred -

[Anonymous]

I have attached the dwg file. I have drawn one dimension, however after experimenting it is all that are wrong.

[Alfred.NESWADBA]

Hi,

edit your dimension style to be not annotative, set it to dimscale = 1 and you'll get the correct value displayed.

Making objects annotative only makes sense for model-space objects, which are then displayed in multiple viewports with different scales.

- alfred -

[Anonymous]

Thank you for helping, I have just changed it and unticked the annotative box and they're still appearing too small? 418 instead of 41825 or something similar.

Jade

[Alfred.NESWADBA]

Hi,

>> I have just changed it and unticked the annotative box and

>> they're still appearing too small?

And you have created a new dimension? (the old one already has the annotative flag)

- alfred -

[Anonymous]

Yes I drew a new dimension. It says in the properties annotative no as well.

Jade

[Alfred.NESWADBA]

Hi,

have you used object snaps to create the dimension (in your first drawing you had not, the right dim-point was created in empty space).

- alfred -

[Anonymous]

Yes I realised that, I tried again snapping them, even on a different measurement and the same thing is still occurring.

Jade

[Alfred.NESWADBA]

Hi,

>> and the same thing is still occurring.

Please upload the last drawing with the new dimension (dimension style not annotative).

- alfred -

[Anonymous]

Thank you, here it is with a few dimensions. All should be essentially times by 100. 

[Alfred.NESWADBA · Accepted solution]

Hi,

I don't know what you select (which object snaps are activate when you create this dimension)

When I turn on the ANNOMONITOR I see that this dimension is not anchored to a geometry.

Using command _DIMREASSOCIATE and show 2 end-points resolves the dim-value.

- alfred -

[Anonymous]

Thank you so much! this has worked