can't save as

[Anonymous]

when I use save as in AutoCAD the computer stock. the problem is solved when repair install just for the first run then stock again. I think it is a virus how can find the virus which prevents autocad from saving or block it if antivirus was not slove the problem.

thanks

[pendean]

Your AutoCAD version is...?
Your WIndows version is...?
Where are you saving files to exactly?

[john.vellek]

Hi @Anonymous,

If you feel this is a security software that is blocking the SaveAs, try rebooting in a diagnostic mode (msconfig). Turn everything off and reboot. If AutoCAD is happy then it is likely one of the application that get loaded at startup and you can re-enable them one at a time until you find the culprit.

Please select the Accept as Solution button if my post solves your issue or answers your question.

[imadHabash]

Hi,

>> I think it is a virus  ....

and maybe NOT .

does this problem just lately appeared ? 

does it happened in every CAD .dwg file or just in a certain one ? 

if you make a new drawing saved on your Desktop place ... any changes ? 

Regards,

[Anonymous]

autocad 2009 $ civil 3d 2011
cant reach to dialg box save as ... the computer stock and the restart
computer

[john.vellek · Accepted solution]

HI @Anonymous,

Are you saying that you just don't see a dialog box when you want to perform a Saveas?

Set your FILEDIA=1 and see if that corrects the problem.

Please select the Accept as Solution button if my post solves your issue or answers your question.

[pendean · Accepted solution]

Is this your actual problem (and solution) https://knowledge.autodesk.com/support/autocad/troubleshooting/caas/sfdcarticles/sfdcarticles/Dialog...

[Anonymous]

in all dwg files

[Anonymous]

no computer stock and need to restart 

[vtkong.com]

Command: FILEDIA, Enter 1 will help you solve this problem

[Anonymous · Accepted solution]

Same problem

FILEDIA =1 works! problem solved!

Thank you 

[vtkong.com]

You can copy the file to and open a new file to try saving
If not, you can use the Dxfout command
Or the audit command, choose Y

[michaelmbgr09]

This worked for me, thanks

[yreyesYJAU4]

Changing the FILEDIA to 1 fixed my Save As problem in AutoCAD Electrical

[Anonymous]

Problem Solved...