Block attributes popup window

[shulinl]

A few versions ago, I used to be able to single click a block and its attributes automatically show up in window on the side. I could go in and change any attribute I need to.

Now I don't see this feature. What command do I need to bring this back? 

Thanks

[cadffm]

Single click doesn't make sense, because you can not selects blocks anymore to do other edits..

But it can work if you start the command first, or you DOUBLEclick on a blockreference

Or you talking about the properties palette, CTRL+1

See We.Tanks reply below!

[cadffm]

Or was it a toolset, instead of AutoCAD?

[dmfrazier]

Sounds like you're describing "selecting" a block (single click) and having its properties (including attributes) appear in the Properties palette. If so, make sure PICKFIRST is set to 1 (on).

[cadffm]

---

@dmfrazier  schrieb:

make sure PICKFIRST is set to 1 (on).

---

Little hint: You don't need pickfirst for using the properties palette.

[WeTanks]

Please refer to the attached documnet.

[cadffm · Accepted solution]

I had deactivated the attributes on my test station - stupid and thanks for the correction.

@shulinl - QuickProperties

In addition to the We.Tanks GIF

https://help.autodesk.com/view/ACD/2022/ENU/?guid=GUID-0EE35099-EB15-44B5-8D5E-3B1C94320744

[shulinl]

QPMODE did the trick!!

Thank you all.