AutoCAD - Paste Orientation/UCS

[per.anders]

Hey!
I turned the dwg file from front to back, when I then paste it into my drawing, it becomes front again, I want it as you see it from above (back). How-to?

[ The subject line of this post has been edited for clarity by @handjonathan Original: Paste ]

[per.anders]

Hey!
I turned the dwg file from front to back, when I then paste it into my drawing, it becomes front again, I want it as you see it from above (back). How-to?

[ The subject line of this post has been edited for clarity by @handjonathan Original: Paste ]

[cadffm]

Hi,

>>", I want it as you see it from above (back). How-to?"

Paste it in another UCS

(set FRONT, rotate the ucs on Y plane 180°)

_-VIEW _front

_UCS Y 0,0 180

_PASTECLIP

or paste whatever you want and use one of the both commands: 3drotate or rotate3d

[cadffm]

Hi,

>>", I want it as you see it from above (back). How-to?"

Paste it in another UCS

(set FRONT, rotate the ucs on Y plane 180°)

_-VIEW _front

_UCS Y 0,0 180

_PASTECLIP

or paste whatever you want and use one of the both commands: 3drotate or rotate3d

[per.anders]

Thanks for the help.

[per.anders]

Thanks for the help.