Adding Tolerances to Dimensional Parametric Constraints

Adding Tolerances to Dimensional Parametric Constraints

Anonymous
Not applicable
538 Views
1 Reply
Message 1 of 2

Adding Tolerances to Dimensional Parametric Constraints

Anonymous
Not applicable

I have an complex area that we have field measured with angles and dimensions so we can make a piece of precast concrete to fit into it. Our precast will have a 3/8" joint around the edges so we have some room for adjustment. So I am trying to draw that area in AutoCAD and using dimensional parametric constraints to get all the field dimensions and angles to work together. However, AutoCAD is much more precise than our field measuring. So if I measure a side that is 12" by my best estimate because of a chipped edge or something, AutoCAD will make that line exactly 12". However, this makes other dimensions not able to be constrained because its not taking into account variations in field conditions. If all of our dimensions have a tolerance of up to 1/8", that falls within that 3/8" joint that we have for adjustment.

 

So my questions is, how do I make dimensional parametric constraints with a tolerance of say 1/8"? I am pretty handy with CAD but cannot figure this one out. I'm starting to think it might not be possible. Thank you for your help.

0 Likes
539 Views
1 Reply
Reply (1)
Message 2 of 2

natasha.l
Alumni
Alumni

Hello @Anonymous, 

 

You can create a custom Dimension Style & set a Tolerance Format to indicate that each measurement will need to factor a 1/8" allowance. 

 

So your drawings/lines will stay true to your field dimensions & the dimension lines will indicate the 1/8" allowance. This will prevent confusion. 

 

  1. Use the DIMSTYLE command to bring up the dialog window 
  2. Review the video >here< to create a general dimension style
  3. Refer to the image below to add the Tolerance format 

toleranceformat.png

 

I hope this is what you were looking for. Smiley Happy

 

Please "Accept Solution" if a reply or replies have helped resolve the issue or answered your question, to help others in the community.

0 Likes