3d modelling in fusion 360

[messe_noire_fab]

Hello all, 

I have been using Cad 2D for years and have recently started using fusion 360 for modelling purposes (visualisation etc)

I have several drawings I would like to put into fusion and make 3D, but so have have been unsuccessful. 

All of the parts will be sheet metal and require folding and my sketches when converted to metal lose all of the "fold lines". 

I have added them back in with the sketch tool but it doesn't seem to allow me to select the individual faces, so I am clearly missing something pretty important lol. 

I can provide sample drawings for reference if required, most of them are simple. 

Cheers

[messe_noire_fab]

Hello all, 

I have been using Cad 2D for years and have recently started using fusion 360 for modelling purposes (visualisation etc)

I have several drawings I would like to put into fusion and make 3D, but so have have been unsuccessful. 

All of the parts will be sheet metal and require folding and my sketches when converted to metal lose all of the "fold lines". 

I have added them back in with the sketch tool but it doesn't seem to allow me to select the individual faces, so I am clearly missing something pretty important lol. 

I can provide sample drawings for reference if required, most of them are simple. 

Cheers

[TheCADnoob]

I would reach out in the Fusion 360 community forums and see if they can help with this one. 

https://forums.autodesk.com/t5/fusion/ct-p/1234

[TheCADnoob]

I would reach out in the Fusion 360 community forums and see if they can help with this one. 

https://forums.autodesk.com/t5/fusion/ct-p/1234