Printing/page set up not displaying correctly

[Anonymous]

Whenever i attempt to print the print window opens then when i click on "Edit Page Setup..." the Page Setup-Layout1" does no longer display correctly and I can not choose any options as I can not see the full window

any suggestions to fix the problem would be greatly appreciated.

Michela

[Emmsleys]

HI @Anonymous, 

What AutoCAD release are you working in? 2015, 2016?

What Mac OS are running? 

As a test you can try logging in as a separate/new user on your Mac to see if this issue happens in that profile with AutoCAD in default settings. 

[Anonymous]

I have a Mac OS X Yosemite Version 10.10.5
and Autocad LT 2013
I have tried as you suggested to login as a guest and it works thanks. But it still does not work on my proper log in where i have all my files.


[cid:08D4B039-AC1C-4704-949C-4324EDF83AAC@lan]


102 Belgrave Road
London SW1V 2BJ
t +44 207 112 7534
m+4407899771492

www.mb-ds.com

[maxim_k]

Hi,

At first you need to install all updates for AutoCAD 2013, the last one add compatability with OS X 10.10
Than you need to try to reset AutoCAD from Application tab of AutoCAD preferences.

Maxim

[Emmsleys · Accepted solution]

Thanks for getting back to me. 

Okay since it was able to work effectively in a new user login I would recommend you reset your AutoCAD settings back to default in your user profile. 

Apply any updates that you might have missed as suggested in a previous post by Maxim. 

SP 1

SP 2

SP 3

[Anonymous]

Thank you for your suggestions that I have all tried but they did not fix the problem they will not allow any upgrade 

I probably try to re install auto Cad? Can that be a way?

---

@Emmsleys wrote:

Thanks for getting back to me. 

Okay since it was able to work effectively in a new user login I would recommend you reset your AutoCAD settings back to default in your user profile. 

Apply any updates that you might have missed as suggested in a previous post by Maxim. 

SP 1

SP 2

SP 3

---

[wei503 · Accepted solution]

Here is the page to re-install AutoCAD LT 2013 for Mac, with SP3.

https://knowledge.autodesk.com/support/autocad-lt-for-mac/downloads/caas/downloads/content/autocad-l...

Thanks,
Wei

[maxim_k]

Have you tried to reset AutoCAD instead of reinstalling it?
And one more question : are you sure you have OS X 10.10.5.? Can it be 10.11.5.?

Maxim

[Emmsleys]

@Anonymous, 

Circling back on your thread, were you able to try any of the suggestions made after my post? Did any of them help with your problem?