Cannot update Autocad 2011 for Mac (update1, 2 and 3)

[Anonymous]

I'd like to download Lion for my Mac (actually with Snow Leopard) but I'm not sure that Autocad 2011 for Mac works. I have a Autocad for Mac Student Edition, it's a complete version but limited to 3 years only. Before install Lion I have read that I need to update Autocad 2011 with the update1, 2 and 3. I've downloaded these update, but when I install them my Mac says to me that there's no Autocad software installed that can be updated!
Student Edition cannot be updated??? The update 1, 2 and 3 is necesary to be sure thet Autocad 2011 works on Lion!!
What can I do to have an Autocad Student Edition that works on Lion? I'll prefer to update the 2011 Version and not install the 2012! Because I'm not sure that there's a 2012 Student Edition avaible!
Thanks!

[maxim_k]

Start AutoCAD and at the Command prompt type "_VERNUM" (without quotes) hit Return.

AutoCAD will respond with version number. What is it?

Maxim

[Anonymous]

Ok, this is the response:

E.49.H.602

view the attachment

[maxim_k · Accepted solution]

You can relax and update to Lion, as you already have AutoCAD for Mac 2011 with Updates 1, 2 and 3 installed.

From Update3 README:

To install this AutoCAD 2011 for Mac Update 3, do the following:
1    Close AutoCAD for Mac and all applications before you begin to install the update.
2    Double-click AutoCAD2011ForMacUpdate3.dmg to mount the volume 3    Double-click AutoCAD2011ForMacUpdate3.mpkg in the new mounted
volume to run the installer.
4    Follow the on-screen instructions.
5    Launch AutoCAD for Mac after the installation has completed.
6    At the command prompt, type _vernum and press Enter to verify the update was installed. The version number should be "E.49.H.602".

Maxim

[Anonymous]

Thank you (both)!

I had a similar issue which this post helped resolved (relatively painlessly!)

I had version number ending .555 but after going ahead with Update 3 for Mac I now have version number (_vernum) ending .602.

Cheers!