Be sure that you have your project properties set to the NFPA library folder and NFPA menu.
The JIC and NFPA symbol graphics are both from ANSI Y32.2. The class designation letters were updated in NFPA-79 and the NFPA library in AutoCAD Electrical reflects this update. The NFPA library also features extra symbols, like solid-state relay, heater, form-c relay contact, LED, bridge rectifier, DC power supply.
There was a typographical error in my previous post. DIN is a predecessor of IEC. But again, for your scenario NFPA makes more sense.
If you want to learn more about the electrical standards supported by AutoCAD Electrical I cover this topic on the Tips and Tricks page at
www.ecadconsultant.com.
Doug McAlexander
Design Engineer/Consultant/Instructor/Mentor
Specializing in AutoCAD Electrical Implementation Support
Phone: (770) 841-8009
www.linkedin.com/in/doug-mcalexander-1a77623
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.