Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Hi,
I have a project where my terminal strips TB1 & TB2 for location TBOX1 are not showing up on the BOM.
The strips TB1 & TB2 for location MCP appear to include the parts used for the TBOX1 location. Why isn't the BOM report separting out the TB1, TB2 strips for location TBOX1?
What version of AcadE? What BOM report, panel or
schematic? What options are you choosing on the initial dialog? Do the terminals
have catalog values assigned on them? I can try and reproduce this once I have
this information. I don't see any issues logged in this area.
If you want me to look at your drawings you can
send them to me directly at pat.murnen@autodesk.com
Hi,
I have a project where my terminal strips TB1 & TB2 for location TBOX1 are
not showing up on the BOM. The strips TB1 & TB2 for location MCP appear to
include the parts used for the TBOX1 location. Why isn't the BOM report
separting out the TB1, TB2 strips for location TBOX1? Thanks, David
Brude
We are using Panel BOM in version 2007.
Attached is a word document explaining the details of what we are seeing.
I'm including the set file that we use as well as the drawings and wdp file.
