Does anyone know if it's possible to create a Terminal table like the one shown in the image or similar?
If it's, how can I fill the spaces with the variables automatically (terminal number, cable, wires, etc.)?
Thank you.
Solved! Go to Solution.
Solved by rhesusminus. Go to Solution.
AutoCAD Electrical includes a table generator that works automatically. It can add drawings to the project, one per terminal strip if preferred, and it inserts a table for each terminal strip. It even fills in the Drawing Description fields with the Location Code and Strip ID. I have attached a sample from the IEC project I created for the AutoCAD Electrical training classes I conduct. You have some degree of control over the appearance of the tables, but they will not appear the same as the tables generated by a competitor's software.
Doug McAlexander
Design Engineer/Consultant/Instructor/Mentor
Specializing in AutoCAD Electrical Implementation Support
Phone: (770) 841-8009
www.linkedin.com/in/doug-mcalexander-1a77623
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Can't find what you're looking for? Ask the community or share your knowledge.