Issues with running scripts in AE 2019

This widget could not be displayed.

Issues with running scripts in AE 2019

Anonymous
Not applicable

Hello,

 

I'm trying to run a line number script in AutoCAD Electrical 2019 that works correctly on my boss'  machine that runs an older, non-electrical version of AutoCAD. While the script runs it does not work correctly on AE 19, as every time I run the script I get differing results, sometimes with the numbers out of place and usually with many numbers overlapping. I'm just looking for any bit of insight as it's been hard just trying to research this issue. Are there any known issues or fixes?

 

Attached is the script, thanks so much regardless.

 

Hal

0 Likes
Reply
Accepted solutions (1)
473 Views
5 Replies
Replies (5)

pendean
Community Legend
Community Legend
post your script file or the entire contents here please, along with a sample DWG file where it does not work.



0 Likes

Anonymous
Not applicable
Here are the contents:



-text

j

mr

1.6875,20.75

0.125

0

3100

-text

j

mr

1.6875,20.25

0.125

0

3101

-text

j

mr

1.6875,19.75

0.125

0

3102

-text

j

mr

1.6875,19.25

0.125

0

3103

-text

j

mr

1.6875,18.75

0.125

0

3104

-text

j

mr

1.6875,18.25

0.125

0

3105

-text

j

mr

1.6875,17.75

0.125

0

3106

-text

j

mr

1.6875,17.25

0.125

0

3107

-text

j

mr

1.6875,16.75

0.125

0

3108

-text

j

mr

1.6875,16.25

0.125

0

3109

-text

j

mr

1.6875,15.75

0.125

0

3110

-text

j

mr

1.6875,15.25

0.125

0

3111

-text

j

mr

1.6875,14.75

0.125

0

3112

-text

j

mr

1.6875,14.25

0.125

0

3113

-text

j

mr

1.6875,13.75

0.125

0

3114

-text

j

mr

1.6875,13.25

0.125

0

3115

-text

j

mr

1.6875,12.75

0.125

0

3116

-text

j

mr

1.6875,12.25

0.125

0

3117

-text

j

mr

1.6875,11.75

0.125

0

3118

-text

j

mr

1.6875,11.25

0.125

0

3119

-text

j

mr

1.6875,10.75

0.125

0

3120

-text

j

mr

1.6875,10.25

0.125

0

3121

-text

j

mr

1.6875,9.75

0.125

0

3122

-text

j

mr

1.6875,9.25

0.125

0

3123

-text

j

mr

1.6875,8.75

0.125

0

3124

-text

j

mr

1.6875,8.25

0.125

0

3125

-text

j

mr

1.6875,7.75

0.125

0

3126

-text

j

mr

1.6875,7.25

0.125

0

3127

-text

j

mr

1.6875,6.75

0.125

0

3128

-text

j

mr

1.6875,6.25

0.125

0

3129

-text

j

mr

1.6875,5.75

0.125

0

3130

-text

j

mr

1.6875,5.25

0.125

0

3131

-text

j

mr

1.6875,4.75

0.125

0

3132

-text

j

mr

1.6875,4.25

0.125

0

3133

-text

j

mr

1.6875,3.75

0.125

0

3134

-text

j

mr

1.6875,3.25

0.125

0

3135

-text

j

mr

11.375,18.75

0.125

0

3136

-text

j

mr

11.375,18.25

0.125

0

3137

-text

j

mr

11.375,17.75

0.125

0

3138

-text

j

mr

11.375,17.25

0.125

0

3139

-text

j

mr

11.375,16.75

0.125

0

3140

-text

j

mr

11.375,16.25

0.125

0

3141

-text

j

mr

11.375,15.75

0.125

0

3142

-text

j

mr

11.375,15.25

0.125

0

3143

-text

j

mr

11.375,14.75

0.125

0

3144

-text

j

mr

11.375,14.25

0.125

0

3145

-text

j

mr

11.375,13.75

0.125

0

3146

-text

j

mr

11.375,13.25

0.125

0

3147

-text

j

mr

11.375,12.75

0.125

0

3148

-text

j

mr

11.375,12.25

0.125

0

3149

-text

j

mr

11.375,11.75

0.125

0

3150

-text

j

mr

11.375,11.25

0.125

0

3151

-text

j

mr

11.375,10.75

0.125

0

3152

-text

j

mr

11.375,10.25

0.125

0

3153

-text

j

mr

11.375,9.75

0.125

0

3154

-text

j

mr

11.375,9.25

0.125

0

3155

-text

j

mr

11.375,8.75

0.125

0

3156

-text

j

mr

11.375,8.25

0.125

0

3157

-text

j

mr

11.375,7.75

0.125

0

3158

-text

j

mr

11.375,7.25

0.125

0

3159

-text

j

mr

11.375,6.75

0.125

0

3160

-text

j

mr

11.375,6.25

0.125

0

3161

-text

j

mr

11.375,5.75

0.125

0

3162

-text

j

mr

11.375,5.25

0.125

0

3163

-text

j

mr

11.375,4.75

0.125

0

3164

-text

j

mr

11.375,4.25

0.125

0

3165

-text

j

mr

11.375,3.75

0.125

0

3166

-text

j

mr

11.375,3.25

0.125

0

3167

-text

j

mr

21.0625,18.75

0.125

0

3168

-text

j

mr

21.0625,18.25

0.125

0

3169

-text

j

mr

21.0625,17.75

0.125

0

3170

-text

j

mr

21.0625,17.25

0.125

0

3171

-text

j

mr

21.0625,16.75

0.125

0

3172

-text

j

mr

21.0625,16.25

0.125

0

3173

-text

j

mr

21.0625,15.75

0.125

0

3174

-text

j

mr

21.0625,15.25

0.125

0

3175

-text

j

mr

21.0625,14.75

0.125

0

3176

-text

j

mr

21.0625,14.25

0.125

0

3177

-text

j

mr

21.0625,13.75

0.125

0

3178

-text

j

mr

21.0625,13.25

0.125

0

3179

-text

j

mr

21.0625,12.75

0.125

0

3180

-text

j

mr

21.0625,12.25

0.125

0

3181

-text

j

mr

21.0625,11.75

0.125

0

3182

-text

j

mr

21.0625,11.25

0.125

0

3183

-text

j

mr

21.0625,10.75

0.125

0

3184

-text

j

mr

21.0625,10.25

0.125

0

3185

-text

j

mr

21.0625,9.75

0.125

0

3186

-text

j

mr

21.0625,9.25

0.125

0

3187

-text

j

mr

21.0625,8.75

0.125

0

3188

-text

j

mr

21.0625,8.25

0.125

0

3189

-text

j

mr

21.0625,7.75

0.125

0

3190

-text

j

mr

21.0625,7.25

0.125

0

3191

-text

j

mr

21.0625,6.75

0.125

0

3192

-text

j

mr

21.0625,6.25

0.125

0

3193

-text

j

mr

21.0625,5.75

0.125

0

3194

-text

j

mr

21.0625,5.25

0.125

0

3195

-text

j

mr

21.0625,4.75

0.125

0

3196

-text

j

mr

21.0625,4.25

0.125

0

3197

-text

j

mr

21.0625,3.75

0.125

0

3198

-text

j

mr

21.0625,3.25

0.125

0

3199









Attached is the DWG file



Thanks again,

Hal Bernstein


0 Likes

Anonymous
Not applicable

Sorry,

-text
j
mr
1.6875,20.75
0.125
0
3100
-text
j
mr
1.6875,20.25
0.125
0
3101
-text
j
mr
1.6875,19.75
0.125
0
3102
-text
j
mr
1.6875,19.25
0.125
0
3103
-text
j
mr
1.6875,18.75
0.125
0
3104
-text
j
mr
1.6875,18.25
0.125
0
3105
-text
j
mr
1.6875,17.75
0.125
0
3106
-text
j
mr
1.6875,17.25
0.125
0
3107
-text
j
mr
1.6875,16.75
0.125
0
3108
-text
j
mr
1.6875,16.25
0.125
0
3109
-text
j
mr
1.6875,15.75
0.125
0
3110
-text
j
mr
1.6875,15.25
0.125
0
3111
-text
j
mr
1.6875,14.75
0.125
0
3112
-text
j
mr
1.6875,14.25
0.125
0
3113
-text
j
mr
1.6875,13.75
0.125
0
3114
-text
j
mr
1.6875,13.25
0.125
0
3115
-text
j
mr
1.6875,12.75
0.125
0
3116
-text
j
mr
1.6875,12.25
0.125
0
3117
-text
j
mr
1.6875,11.75
0.125
0
3118
-text
j
mr
1.6875,11.25
0.125
0
3119
-text
j
mr
1.6875,10.75
0.125
0
3120
-text
j
mr
1.6875,10.25
0.125
0
3121
-text
j
mr
1.6875,9.75
0.125
0
3122
-text
j
mr
1.6875,9.25
0.125
0
3123
-text
j
mr
1.6875,8.75
0.125
0
3124
-text
j
mr
1.6875,8.25
0.125
0
3125
-text
j
mr
1.6875,7.75
0.125
0
3126
-text
j
mr
1.6875,7.25
0.125
0
3127
-text
j
mr
1.6875,6.75
0.125
0
3128
-text
j
mr
1.6875,6.25
0.125
0
3129
-text
j
mr
1.6875,5.75
0.125
0
3130
-text
j
mr
1.6875,5.25
0.125
0
3131
-text
j
mr
1.6875,4.75
0.125
0
3132
-text
j
mr
1.6875,4.25
0.125
0
3133
-text
j
mr
1.6875,3.75
0.125
0
3134
-text
j
mr
1.6875,3.25
0.125
0
3135
-text
j
mr
11.375,18.75
0.125
0
3136
-text
j
mr
11.375,18.25
0.125
0
3137
-text
j
mr
11.375,17.75
0.125
0
3138
-text
j
mr
11.375,17.25
0.125
0
3139
-text
j
mr
11.375,16.75
0.125
0
3140
-text
j
mr
11.375,16.25
0.125
0
3141
-text
j
mr
11.375,15.75
0.125
0
3142
-text
j
mr
11.375,15.25
0.125
0
3143
-text
j
mr
11.375,14.75
0.125
0
3144
-text
j
mr
11.375,14.25
0.125
0
3145
-text
j
mr
11.375,13.75
0.125
0
3146
-text
j
mr
11.375,13.25
0.125
0
3147
-text
j
mr
11.375,12.75
0.125
0
3148
-text
j
mr
11.375,12.25
0.125
0
3149
-text
j
mr
11.375,11.75
0.125
0
3150
-text
j
mr
11.375,11.25
0.125
0
3151
-text
j
mr
11.375,10.75
0.125
0
3152
-text
j
mr
11.375,10.25
0.125
0
3153
-text
j
mr
11.375,9.75
0.125
0
3154
-text
j
mr
11.375,9.25
0.125
0
3155
-text
j
mr
11.375,8.75
0.125
0
3156
-text
j
mr
11.375,8.25
0.125
0
3157
-text
j
mr
11.375,7.75
0.125
0
3158
-text
j
mr
11.375,7.25
0.125
0
3159
-text
j
mr
11.375,6.75
0.125
0
3160
-text
j
mr
11.375,6.25
0.125
0
3161
-text
j
mr
11.375,5.75
0.125
0
3162
-text
j
mr
11.375,5.25
0.125
0
3163
-text
j
mr
11.375,4.75
0.125
0
3164
-text
j
mr
11.375,4.25
0.125
0
3165
-text
j
mr
11.375,3.75
0.125
0
3166
-text
j
mr
11.375,3.25
0.125
0
3167
-text
j
mr
21.0625,18.75
0.125
0
3168
-text
j
mr
21.0625,18.25
0.125
0
3169
-text
j
mr
21.0625,17.75
0.125
0
3170
-text
j
mr
21.0625,17.25
0.125
0
3171
-text
j
mr
21.0625,16.75
0.125
0
3172
-text
j
mr
21.0625,16.25
0.125
0
3173
-text
j
mr
21.0625,15.75
0.125
0
3174
-text
j
mr
21.0625,15.25
0.125
0
3175
-text
j
mr
21.0625,14.75
0.125
0
3176
-text
j
mr
21.0625,14.25
0.125
0
3177
-text
j
mr
21.0625,13.75
0.125
0
3178
-text
j
mr
21.0625,13.25
0.125
0
3179
-text
j
mr
21.0625,12.75
0.125
0
3180
-text
j
mr
21.0625,12.25
0.125
0
3181
-text
j
mr
21.0625,11.75
0.125
0
3182
-text
j
mr
21.0625,11.25
0.125
0
3183
-text
j
mr
21.0625,10.75
0.125
0
3184
-text
j
mr
21.0625,10.25
0.125
0
3185
-text
j
mr
21.0625,9.75
0.125
0
3186
-text
j
mr
21.0625,9.25
0.125
0
3187
-text
j
mr
21.0625,8.75
0.125
0
3188
-text
j
mr
21.0625,8.25
0.125
0
3189
-text
j
mr
21.0625,7.75
0.125
0
3190
-text
j
mr
21.0625,7.25
0.125
0
3191
-text
j
mr
21.0625,6.75
0.125
0
3192
-text
j
mr
21.0625,6.25
0.125
0
3193
-text
j
mr
21.0625,5.75
0.125
0
3194
-text
j
mr
21.0625,5.25
0.125
0
3195
-text
j
mr
21.0625,4.75
0.125
0
3196
-text
j
mr
21.0625,4.25
0.125
0
3197
-text
j
mr
21.0625,3.75
0.125
0
3198
-text
j
mr
21.0625,3.25
0.125
0
3199

Above is the code, and here is the example drawing with the script results.

 

Thanks,

Hal

0 Likes

rhesusminus
Mentor
Mentor
Accepted solution
Try to type OSNAPCOORD on the command line, and set it to 1.

Now, try the script again.

Trond Hasse Lie
EPLAN Expert and ex-AutoCAD Electrical user.
Ctrl Alt El
Please select "Accept Solution" if this post answers your question. 'Likes' won't hurt either. 😉

Anonymous
Not applicable

Thanks so much, that worked perfectly!

 

-Hal

0 Likes