Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I have some old 2D drawings that are in the Z - X Coordinates. I would like to convert the z coordinates over to y coordinates so I can work in the Y-X coordinates.
I have some old 2D drawings that are in the Z - X Coordinates. I would like to convert the z coordinates over to y coordinates so I can work in the Y-X coordinates.
Are you sure that the drawings are in that coordinate system? If you reset the USC to WCS, by typing this on the command line:
UCS World Plan Current
Does that fix the problem?
If not, you'll have to use the ROTATE3D command, to rotate everything to the correct orientation.
Trond Hasse Lie EPLAN Expert and ex-AutoCAD Electrical user. Ctrl Alt El Please select "Accept Solution" if this post answers your question. 'Likes' won't hurt either. 😉
Are you sure that the drawings are in that coordinate system? If you reset the USC to WCS, by typing this on the command line:
UCS World Plan Current
Does that fix the problem?
If not, you'll have to use the ROTATE3D command, to rotate everything to the correct orientation.
Trond Hasse Lie EPLAN Expert and ex-AutoCAD Electrical user. Ctrl Alt El Please select "Accept Solution" if this post answers your question. 'Likes' won't hurt either. 😉
The images didn't come through. Are you able to share an example file here, and I'll take a look?
Trond Hasse Lie EPLAN Expert and ex-AutoCAD Electrical user. Ctrl Alt El Please select "Accept Solution" if this post answers your question. 'Likes' won't hurt either. 😉
The images didn't come through. Are you able to share an example file here, and I'll take a look?
Trond Hasse Lie EPLAN Expert and ex-AutoCAD Electrical user. Ctrl Alt El Please select "Accept Solution" if this post answers your question. 'Likes' won't hurt either. 😉
No attachment here.. You have to do it in a web browser. attachments from an e-mail seldom gets through...
Trond Hasse Lie EPLAN Expert and ex-AutoCAD Electrical user. Ctrl Alt El Please select "Accept Solution" if this post answers your question. 'Likes' won't hurt either. 😉
No attachment here.. You have to do it in a web browser. attachments from an e-mail seldom gets through...
Trond Hasse Lie EPLAN Expert and ex-AutoCAD Electrical user. Ctrl Alt El Please select "Accept Solution" if this post answers your question. 'Likes' won't hurt either. 😉
Here's a short screencast showing how to ROTATE3D the schamatic back to the XY-plane.
The steps are:
Move the lower left corner of the frame to 0,0,0
Roatete everything around 0,0,0
Trond Hasse Lie EPLAN Expert and ex-AutoCAD Electrical user. Ctrl Alt El Please select "Accept Solution" if this post answers your question. 'Likes' won't hurt either. 😉
Here's a short screencast showing how to ROTATE3D the schamatic back to the XY-plane.
The steps are:
Move the lower left corner of the frame to 0,0,0
Roatete everything around 0,0,0
Trond Hasse Lie EPLAN Expert and ex-AutoCAD Electrical user. Ctrl Alt El Please select "Accept Solution" if this post answers your question. 'Likes' won't hurt either. 😉
