Announcements
Attention for Customers without Multi-Factor Authentication or Single Sign-On - OTP Verification rolls out April 2025. Read all about it here.

catalog Siemens PLC

Anonymous

catalog Siemens PLC

Anonymous
Not applicable

Hi everyone,

I've AutoCad  ELECTRICAL 2015,

 

I've updated my catalog with brand Siemens, but when I insert a PLC module and try to choose from catalog I don't find the PLC Siemens, just only ABB, AB & Telemecanique.

Has someone some suggestion? Talking about PLC  there are only the three brand mentioned before?

 

thanks a lot!

0 Likes
Reply
Accepted solutions (1)
9,177 Views
5 Replies
Replies (5)

Anonymous
Not applicable

You need to update your installation program.  Go to Windows Control panel, Programs & Features.

Then select your AutoCAD Electrical installation program, then 'Uninstall/Change' which should take you to 'Add/remove Feature' - included in this is selecting which manufactures you want to add or remove from your installation.

Hope this helps.

0 Likes

Anonymous
Not applicable

hi,

I've already done it...I see that I upgrade the catalog but in ace_plc.mdb don't find the Siemens PLC series...

bye

DT

0 Likes

jalger
Collaborator
Collaborator
Accepted solution

For AutoCAD Electrical 2015 the add/remove method tends to not work all the time.

 

Sadly, in this case I would recommend Uninstalling then re-install with all of the libraries you want to use.

 

 

You can try re-intializing it. ( sometimes this works, but honestly it takes less time to re-install)

 

1. use the "Reset to Default Settings..." tool (make sure the program is working properly)

2. In control panel "add/remove",  select your Libraries

3.  use the "Reset to Default Settings..." tool (to reload the libraries

4. restart the computer, then start the program and check

 

I hope this helps,

 

James

James Alger
(I'm on several hundred posts as "algerj")

Work:
Dell Precision 5530 (Xeon E 2176M)
1tb SSD, 64GB RAM
Nvidia Quadro P2000, Win10

Anonymous
Not applicable

Hi,

good suggestion... in the next days I'll try.

will let you know

 

Davide

0 Likes

Anonymous
Not applicable

hi everyone, I'm come back!

 

the good new is I've got the goal!

I followed the suggestion:

1) reinstall ACADE

2) update the Library.

 

now I have all library I've choosed for PLC (siemens etc..)

 

thanks a lot to everyone!

 

Davide 

0 Likes