Plates are in inches

[avinash00002002]

Hi, 

After registering drawing to model all plates dimensions and sizes are coming in inches.  I want it in millimeter.  How to do it. 

Can anyone explain me why this occurs. 

Thanks, 

Avinash 

[avinash00002002]

Hi, 

After registering drawing to model all plates dimensions and sizes are coming in inches.  I want it in millimeter.  How to do it. 

Can anyone explain me why this occurs. 

Thanks, 

Avinash 

[Sebastian_Eiche]

open your project settings and have a look for the length units.

[Sebastian_Eiche]

open your project settings and have a look for the length units.

[avinash00002002]

Yes it is already in mm. 

[avinash00002002]

Yes it is already in mm. 

[Sebastian_Eiche]

we need more informations, do mean the inch sizes in the model or in the detail drawings?

[Sebastian_Eiche]

we need more informations, do mean the inch sizes in the model or in the detail drawings?

[avinash00002002]

Mdelis in metric unit but problems in detail drawings. All plates dimensions in inches and in the list also.  All beams. Columns and Assembly drawing is in metric. 

[avinash00002002]

Mdelis in metric unit but problems in detail drawings. All plates dimensions in inches and in the list also.  All beams. Columns and Assembly drawing is in metric. 

[Sebastian_Eiche · Accepted solution]

There are a few defaults for the units in drawings in the management tools. And additional you had to use the correct prototypes. Open the prototype and have a look in the project settings and dimstyle

[Sebastian_Eiche · Accepted solution]

There are a few defaults for the units in drawings in the management tools. And additional you had to use the correct prototypes. Open the prototype and have a look in the project settings and dimstyle

[janet_black · Accepted solution]

Hi

When creating drawings in Metric the width of the plate is in imperial. To resolve this issue, follow the procedure below.

1. Select “Management Tools” button in the upper right corner on the Home tab.
2. Select the Defaults category
3. Use the filter and type plate
4. Remove the [20,5006,474] also the “after Width.

Remember to “Load Settings in Advance.”

Go back to the model and Update Defaults.

Please see attachment for a visual step by step

I hope this helps.

Janet 

Graitec CANADA

[janet_black · Accepted solution]

Hi

When creating drawings in Metric the width of the plate is in imperial. To resolve this issue, follow the procedure below.

1. Select “Management Tools” button in the upper right corner on the Home tab.
2. Select the Defaults category
3. Use the filter and type plate
4. Remove the [20,5006,474] also the “after Width.

Remember to “Load Settings in Advance.”

Go back to the model and Update Defaults.

Please see attachment for a visual step by step

I hope this helps.

Janet 

Graitec CANADA

[avinash00002002]

Now Plate dimensions are in Metric and written scale is changed to imperial.

[avinash00002002]

Now Plate dimensions are in Metric and written scale is changed to imperial.

[ashish.rai4997]

Thanks for the answer

[ashish.rai4997]

Thanks for the answer