Advance Steel 2019 Update

[acbsdesign]

Hello,
There are many new releases / updated / fixes for Autodesk products released today-are we getting an update for Advance Steel 2019?

Thank you,

Ilko Dimitrov

ACBS

Edited by
Discussion_Admin

[acbsdesign]

Hello,
There are many new releases / updated / fixes for Autodesk products released today-are we getting an update for Advance Steel 2019?

Thank you,

Ilko Dimitrov

ACBS

Edited by
Discussion_Admin

[Discussion_Admin]

Hey everyone,

Just a FYI we have a Idea board for this product.

Please list your ideas there and get your peers to vote on them

Here is a thread on how to use the Idea boards

Thanks
Discussion_Admin

[Discussion_Admin]

Hey everyone,

Just a FYI we have a Idea board for this product.

Please list your ideas there and get your peers to vote on them

Here is a thread on how to use the Idea boards

Thanks
Discussion_Admin

[Sebastian_Eiche]

Wait a minute I just get back with popcorn and nachos...

[Sebastian_Eiche]

Wait a minute I just get back with popcorn and nachos...

[Anonymous]

You mean the same idea board that has ideas from 2016 that are still not implemented. 

[Anonymous]

You mean the same idea board that has ideas from 2016 that are still not implemented. 

[markhubrich]

https://forums.autodesk.com/t5/advance-steel-ideas/catch-up-on-ideas-and-do-not-let-them-become-2-ye...

Please vote 😐 

[markhubrich]

https://forums.autodesk.com/t5/advance-steel-ideas/catch-up-on-ideas-and-do-not-let-them-become-2-ye...

Please vote 😐 

[Discussion_Admin]

---

@Anonymous wrote:

You mean the same idea board that has ideas from 2016 that are still not implemented. 

---

There probably some old ideas there yes.

Votes for those old ideas?

Please note it's a Idea board not a to do list and even if a Idea is excepted it takes time to implement

DA

DA

[Discussion_Admin]

---

@Anonymous wrote:

You mean the same idea board that has ideas from 2016 that are still not implemented. 

---

There probably some old ideas there yes.

Votes for those old ideas?

Please note it's a Idea board not a to do list and even if a Idea is excepted it takes time to implement

DA

DA

[Discussion_Admin]

---

@markhubrich wrote:

https://forums.autodesk.com/t5/advance-steel-ideas/catch-up-on-ideas-and-do-not-let-them-become-2-ye...

Please vote 😐 

---

This is on the community teams list of things to work on

DA

[Discussion_Admin]

---

@markhubrich wrote:

https://forums.autodesk.com/t5/advance-steel-ideas/catch-up-on-ideas-and-do-not-let-them-become-2-ye...

Please vote 😐 

---

This is on the community teams list of things to work on

DA

[Anonymous]

https://forums.autodesk.com/t5/advance-steel-ideas/nuts-amp-bolts/idi-p/6367301#comments

Does it really take 3 years to weld a nut to a plate... this is just the first example of a great idea under review for 3 years. 

[Anonymous]

https://forums.autodesk.com/t5/advance-steel-ideas/nuts-amp-bolts/idi-p/6367301#comments

Does it really take 3 years to weld a nut to a plate... this is just the first example of a great idea under review for 3 years. 

[markhubrich]

Do I smell a competition? LOL

This one was accepted 😄 and has zero votes a little over 3 years ago

https://forums.autodesk.com/t5/advance-steel-ideas/dimension-chain-for-spandrell-beams-not-to-interf...

[markhubrich]

Do I smell a competition? LOL

This one was accepted 😄 and has zero votes a little over 3 years ago

https://forums.autodesk.com/t5/advance-steel-ideas/dimension-chain-for-spandrell-beams-not-to-interf...

[Anonymous]

I see your accepted Idea with Zero votes and raise you a Future consideration from 2015.

https://forums.autodesk.com/t5/advance-steel-ideas/bolt-generator/idi-p/5767040

Or how about an Accepted idea from 2015 that is still not implemented.

https://forums.autodesk.com/t5/advance-steel-ideas/labels-for-holes-to-point-towards-center-of-hole-...

[Anonymous]

I see your accepted Idea with Zero votes and raise you a Future consideration from 2015.

https://forums.autodesk.com/t5/advance-steel-ideas/bolt-generator/idi-p/5767040

Or how about an Accepted idea from 2015 that is still not implemented.

https://forums.autodesk.com/t5/advance-steel-ideas/labels-for-holes-to-point-towards-center-of-hole-...

[acbsdesign]

DA:

You did not get it, let me explain how it works:

1. There is a need for software on the market for detailing

2. A few invest and start developing it

3. Bigger one is buying it, because sees users are willing to pay for it and there is potential in it

4. Development slows down and gets users frustrated. Product manager is saying that this and this has to be done in Revit (on the Adv. Steel idea station)

5. PM is hiding in the Riverside Forest and not stepping up and saying why this year we do not get any real update / fix as of 12/17/18.

6. Users stop paying in 2020

7. Users go to Tekla or SDS/2

8. You become jobless

9. Everything gets where it belongs.

Now-go back to line 4 and try to change the things in the right direction.

Simple.

[acbsdesign]

DA:

You did not get it, let me explain how it works:

1. There is a need for software on the market for detailing

2. A few invest and start developing it

3. Bigger one is buying it, because sees users are willing to pay for it and there is potential in it

4. Development slows down and gets users frustrated. Product manager is saying that this and this has to be done in Revit (on the Adv. Steel idea station)

5. PM is hiding in the Riverside Forest and not stepping up and saying why this year we do not get any real update / fix as of 12/17/18.

6. Users stop paying in 2020

7. Users go to Tekla or SDS/2

8. You become jobless

9. Everything gets where it belongs.

Now-go back to line 4 and try to change the things in the right direction.

Simple.

[Anonymous]

Currently at Step 6.5 over here.

[Anonymous]

Currently at Step 6.5 over here.

[acbsdesign]

86. ALL tokens included in BOM on drawings, including dwg number, job number and revision number.

It is posted in the idea station for "voting". 

[acbsdesign]

86. ALL tokens included in BOM on drawings, including dwg number, job number and revision number.

It is posted in the idea station for "voting". 

[Anonymous]

Ilko,

Apparently I'll wait a year to see where this novel ends. I am not going to stop learning the software(just in case), but I am going to stop buying a license for the moment.

[Anonymous]

Ilko,

Apparently I'll wait a year to see where this novel ends. I am not going to stop learning the software(just in case), but I am going to stop buying a license for the moment.

[acbsdesign]

Same here, I am not staying with a software having zero improvements done, it is unacceptable.

PM is hiding and not saying as anything.

Edited by
Discussion_Admin

[acbsdesign]

Same here, I am not staying with a software having zero improvements done, it is unacceptable.

PM is hiding and not saying as anything.

Edited by
Discussion_Admin

[acbsdesign]

"2018 has been a great year! Thank you all for sharing support, feedback, critiques, and amazing ideas. Keep them coming next year!"

This is what Tekla posted to their users.

Looking forward to see what our management will post.

[acbsdesign]

"2018 has been a great year! Thank you all for sharing support, feedback, critiques, and amazing ideas. Keep them coming next year!"

This is what Tekla posted to their users.

Looking forward to see what our management will post.

[acbsdesign]

87. Again and Again-Please do something about this-DO STOP RE-GENERATING ANY DEFAULT DIMENSIONS. Hiding will not help, do something to fix this.

[acbsdesign]

87. Again and Again-Please do something about this-DO STOP RE-GENERATING ANY DEFAULT DIMENSIONS. Hiding will not help, do something to fix this.

[acbsdesign]

88. Mark elements connected by selected bolt or selected weld.

This should be an easy one.

[acbsdesign]

88. Mark elements connected by selected bolt or selected weld.

This should be an easy one.

[Anonymous]

I'm curious about the above comments about zero development on AS and moving to SDS as a replacement.  Are there any SDS/2 users here and do they feel SDS is being developed in a timely manner?  Would love to hear some comments on that.

[Anonymous]

I'm curious about the above comments about zero development on AS and moving to SDS as a replacement.  Are there any SDS/2 users here and do they feel SDS is being developed in a timely manner?  Would love to hear some comments on that.

[acbsdesign]

Anything that sits to the right of zero is more than a zero.

@bukko may answer your question if it comes for this year's updates, I think they have Tekla and SDS/2 licenses in their company.

[acbsdesign]

Anything that sits to the right of zero is more than a zero.

@bukko may answer your question if it comes for this year's updates, I think they have Tekla and SDS/2 licenses in their company.

[Sebastian_Eiche]

For weld it's possible to use the command 'show shop parts' from the tool palette and then select the weld. This will show the whole parts which are connected in shop but better then nothing 

[Sebastian_Eiche]

For weld it's possible to use the command 'show shop parts' from the tool palette and then select the weld. This will show the whole parts which are connected in shop but better then nothing