Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Since switching to ACad 2015, my ability to toggle a temporary Ortho mode by holding shift is gone. I have cecked that temporaryoverride is set to <1> and that in the CUI the shift key is set to toggle ortho mode on and off (and so is F8). What else can I try? Thanks.
That's been a core funtion in AutoCAD for some time (no user addition/definition required): works fine in plain AutoCAD 2015. There is a slight delay in activation as you know, are you sure your delay is not a little longer?
If your shift key is both set to toggle ortho mode on and off, and as ortho override key; might that not be the issue? I don't think your shift key should be set to toggle ortho mode the way F8 does, but that it should only be set as a temporary override key.
Best regards Kasper Wuyts _______________________________________________________________________________ If this post solves your problem, clicking the 'accept as solution' button would be greatly appreciated.
I turned off tempoverride, with shift set to toggle ortho. No change. I then retoggled tempoverride, and then removed shift from the temporary override menu in the CUI, and it still wouldn't work. Thanks for the suggestion.
